Plumbing - Rigid Plastic Pipe Install Guide
How measure and design PVC dimension
Project spot measure the dimension
Calculation the Dimension
How to Cut Rigid Plastic Pipe
Cutting rigid plastic pipe is fairly straightforward and can be done with various tools. Here are some methods and steps to follow:
Using a Pipe Cutter:
Measure and Mark: Measure the length of pipe you need and mark the cutting point with a marker or pencil.
Position the Pipe Cutter: Place the pipe cutter around the pipe, aligning the cutting blade with your mark.
Tighten and Rotate: Tighten the cutter around the pipe and rotate it around the pipe, tightening further as you go. Continue until the pipe is cut through.
Using a Hacksaw:
Secure the Pipe: Clamp the pipe securely in a vise or use a suitable holder to keep it steady.
Measure and Mark: Measure and mark the cutting point with a marker or pencil.
Cut the Pipe: Place the hacksaw on the mark and use smooth, even strokes to cut through the pipe. Be patient and let the saw do the work.
Using a Miter Saw:
Measure and Mark: Measure and mark the cutting point.
Position the Pipe: Place the pipe on the saw's base, aligning your mark with the blade.
Cut the Pipe: Lower the miter saw blade slowly and steadily through the pipe to make a clean cut.
Finishing Touches:
Deburr the Edges
PVC Pipe Install Step by Step
