SAE J2601 Appendix E Cold Dispenser Optional Look-up Tables 16

The following tables are optional tables that can be used for the purpose of reducing fueling time after a repeated fueling. The CD tables are for communications only. In order to use the CD, the dispenser shall utilize a SIL-rated temperature sensor at the coupling location. This reference temperature (either CD 0 °C, CD -10 °C) is the start temperature for which these tables are used. The rest of the fueling procedure is identical to the standard tables in Appendix D. See Appendix G for table value interpolation guideline. Note that the SAE J2601 tables are in the international format for commas and periods (this is opposite to the convention used for the U.S.).

Below is the key to the tables found in Appendix E:

E.1 Communications Cold Dispenser Look-up Tables

E.1.1 0 °C Communications Look-Up Tables

Table E1 H70-T40 CHSS Capacity Category A communications (CD 0 °C)

Table E2 H70-T30 CHSS Capacity Category A communications (CD 0 °C)

Table E3 H70-T40 CHSS Capacity Category B communications (CD 0 °C)

Table E4 H70-T30 CHSS Capacity Category B communications (CD 0 °C)

Table E5 H70-T40 CHSS Capacity Category C communications (CD 0 °C)

Table E6 H70-T30 CHSS Capacity Category C communications (CD 0 °C)

E.1.2 -10 °C Communications Look-Up Tables

Table E7 H70-T40 CHSS Capacity Category A communications (CD -10 °C)

Table E8 H70-T30 CHSS Capacity Category A communications (CD -10 °C)

Table E9 H70-T40 CHSS Capacity Category B communications (CD -10°C)

Table E10 H70-T30 CHSS Capacity Category B communications (CD -10 °C)

Table E11 H70-T40 CHSS Capacity Category C communications (CD -10 °C)

Table E12 H70-T30 CHSS Capacity Category C communications (CD -10 °C)

E.2 COMMUNICATIONS COLD DISPENSER LOOK-UP TABLES

E.2.1 0 °C Communications Look-Up Tables